[SATLUG] wireless problem using linux driver

Alex Bartonek bartonekdragracing at yahoo.com
Thu Dec 27 14:30:35 CST 2007


--- Chris Lemire <good_bye300 at yahoo.com> wrote:

> chris at ubuntu:~/Desktop$ ifconfig 
> eth0      Link encap:Ethernet  HWaddr
> 00:14:2A:BD:89:A2  
>           inet addr:192.168.1.109 
> Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::214:2aff:febd:89a2/64
> Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500 
> Metric:1
>           RX packets:7379728 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:6016010 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:7210469467 (6.7 GB)  TX
> bytes:1399618463 (1.3 GB)
>           Interrupt:20 Base address:0x8000 
> 
> eth1      Link encap:Ethernet  HWaddr
> 00:C0:26:7D:4C:DF  
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0
> frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0
> carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Interrupt:17 Base address:0xc000 
> 
> ham0      Link encap:Ethernet  HWaddr
> 00:FF:65:18:68:AC  
>           inet addr:5.181.26.158 
> Bcast:5.255.255.255  Mask:255.0.0.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1200 
> Metric:1
>           RX packets:356 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:304 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:500 
>           RX bytes:40287 (39.3 KB)  TX bytes:337182
> (329.2 KB)
> 
> lo        Link encap:Local Loopback  
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:45444 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:45444 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:0 
>           RX bytes:2103968 (2.0 MB)  TX
> bytes:2103968 (2.0 MB)
> 
> chris at ubuntu:~/Desktop$ 


if eth0 and eth1 are your NIC cards (not wifi) then
its not being recognized.  Is it listed in 'lspci' ?



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs


More information about the SATLUG mailing list