[SATLUG] wireless problem using linux driver

Chris Lemire good_bye300 at yahoo.com
Thu Dec 27 20:53:33 CST 2007


No, it shouldn't be shown by lspci. It's a wireless usb network adapter model tew-424ub. I think it has realtek chipset.

$ lsusb 
Bus 002 Device 008: ID 0bda:8189 Realtek Semiconductor Corp. <--- this is it
Bus 002 Device 007: ID 0781:5151 SanDisk Corp. Cruzer Micro 256/512MB Flash Drive
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 005: ID 03f0:7a04 Hewlett-Packard 
Bus 001 Device 006: ID 046d:c216 Logitech, Inc. Dual Action Gamepad
Bus 001 Device 003: ID 046e:5250 Behavior Tech. Computer Corp. 
Bus 001 Device 004: ID 046d:c00e Logitech, Inc. M-BJ69 Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000  


Alex Bartonek <bartonekdragracing at yahoo.com> wrote: 
--- Chris Lemire  wrote:

> chris at ubuntu:~/Desktop$ ifconfig 
> eth0      Link encap:Ethernet  HWaddr
> 00:14:2A:BD:89:A2  
>           inet addr:192.168.1.109 
> Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::214:2aff:febd:89a2/64
> Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500 
> Metric:1
>           RX packets:7379728 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:6016010 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:7210469467 (6.7 GB)  TX
> bytes:1399618463 (1.3 GB)
>           Interrupt:20 Base address:0x8000 
> 
> eth1      Link encap:Ethernet  HWaddr
> 00:C0:26:7D:4C:DF  
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0
> frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0
> carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Interrupt:17 Base address:0xc000 
> 
> ham0      Link encap:Ethernet  HWaddr
> 00:FF:65:18:68:AC  
>           inet addr:5.181.26.158 
> Bcast:5.255.255.255  Mask:255.0.0.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1200 
> Metric:1
>           RX packets:356 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:304 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:500 
>           RX bytes:40287 (39.3 KB)  TX bytes:337182
> (329.2 KB)
> 
> lo        Link encap:Local Loopback  
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:45444 errors:0 dropped:0
> overruns:0 frame:0
>           TX packets:45444 errors:0 dropped:0
> overruns:0 carrier:0
>           collisions:0 txqueuelen:0 
>           RX bytes:2103968 (2.0 MB)  TX
> bytes:2103968 (2.0 MB)
> 
> chris at ubuntu:~/Desktop$ 


if eth0 and eth1 are your NIC cards (not wifi) then
its not being recognized.  Is it listed in 'lspci' ?



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs
-- 
_______________________________________________
SATLUG mailing list
SATLUG at satlug.org
http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
Powered by Rackspace (www.rackspace.com)


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.


More information about the SATLUG mailing list