[SATLUG] Dual Monitors with FC6

Fri Jun 1 17:24:28 CDT 2007

No, it's not a 64-bit processor, so no, I'm not running 64-bit FC.

On 6/1/07, Gabriel Doss <gabriel.doss at gmail.com> wrote:
>
> Your xorg looks alright to me. It is how I've got mine setup, except of
> course mine is a desktop and uses nvidia.
>
> I guess one question I would have is your Sony a 64-bit processor? And if
> so
> do you have a 64-bit install of FC6 running?
>
> On 5/30/07, Matt Kinsel <mkinsel at gmail.com> wrote:
> >
> > Thanks for the help, guys.  Here's what my (ideal) dual-head
> xorg.conflooks
> > like now: http://docs.google.com/Doc?id=dgrrq4fk_89dkgpnp
> >
> > I took your advice and found the propriety driver, fglrx.  Here's the
> one
> > I
> > installed:
> >
> >
> http://www2.ati.com/drivers/linux/ati-driver-installer-8.35.5-x86.x86_64.run
> >
> > However, I can't get X to work with that driver, whether I try dual-head
> > or
> > single-head (http://docs.google.com/Doc?id=dgrrq4fk_90jjqtn5).  I get
> the
> > following error when trying to start X:
> > (EE) No devices found
> >
> > As reassurance that the driver is there, it shows up in the GUI display
> > settings, and I have the config tools (aticonfig) associated with the
> > driver.  Could y'all help me out with this?
> >
> > Thanks!
> >
> > On 5/29/07, Gabriel Doss <gabriel.doss at gmail.com> wrote:
> > >
> > > Hi Matt,
> > >
> > > I wasn't on my computer much this weekend, so sorry for the late
> > response.
> > >
> > > As for the XF86 error, that sounds like the driver just cannot handle
> > what
> > > you want. I'd try what Charles suggested and use the ATI proprietary
> > > driver.
> > > ATIs are notoriously hard to configure with Linux, though some do have
> > > great
> > > success with it. I've never used ATI with Linux so I cannot offer any
> > help
> > > there.
> > >
> > > My video card has two VGA outs and I specify the same card on
> videocard0
> > > and
> > > videocard1, so I know that can work. That being said, the card I have
> is
> > > specifically designed for multi-monitor support. You have stated you
> get
> > > cloned monitors, so we know the card can give a signal to two monitors
> > at
> > > the same time. Whether it can deliver something different is the
> > question.
> > >
> > > You will want to disable cloning and enable xinerama once you get to
> > that
> > > point. Xinerama spreads the desktop across two monitors allowing
> > different
> > >
> > > content on each.
> > >
> > > The only error you get now is regarding the videocards not being
> allowed
> > > to
> > > be assigned to the same device. If that is not allowed, then you will
> > get
> > > an
> > > error saying no devices detected and no screens found as there is no
> > valid
> > >
> > > device at that point.
> > >
> > > I also found a link to someone's xorg.conf file using FC3 and a Sony
> > Vaio
> > > PCG-GRX616MP. I'm not sure what model you have, but you can see in
> their
> > > xorg file they used the "radeon" video card driver. There are
> definitely
> > > some differences in their system and yours, but it should help you
> out.
> > > The
> > > also were cloning, where you want xinerama, so leave the stuff about
> > > cloning
> > > out of the second monitor and make sure at the top it stays xinerama
> > "on"
> > > and clone "off".
> > >
> >
> http://prouchon.free.fr/Linux/Fedora%20Core%203%20on%20Sony%20Vaio%20PCG-GRX616MP.html#DUAL_HEAD
> > >
> > >
> > > Gabe
> > >
> > > >
> > > >
> > > > Matt Kinsel wrote:
> > > > > Thanks, Gabriel.  I've fixed up my xorg.conf file like you said;
> you
> > > can
> > > > > see
> > > > > it here: http://docs.google.com/Doc?id=dgrrq4fk_89dkgpnp
> > > > >
> > > > > But I'm still not able to start my X server with that config.  I
> get
> > > > these
> > > > > errors in Xorg.0.log:
> > > > > (EE) ATI: XF86Config Device sections "Videocard0" and "Videocard1"
> > may
> > >
> > > > not
> > > > > be assigned to the same adapter
> > > > > (EE)No devices detected
> > > > >
> > > > > And after those two errors there's this message:
> > > > > Fatal server error:
> > > > > no screens found
> > > > >
> > > > > As you can see on my xorg.conf, "Videocard0" and "Videocard1" are
> > > > referring
> > > > > to the same card, which is sending outputs to both
> monitors.  Should
> > I
> > > > just
> > > > > eliminate "Videocard1" and have both "Screen" sections link to
> > > > > "Videocard0"?
> > > > >
> > > > > And I forgot to mention some important info in the last
> email.  The
> > > > > dual-screen "kind of" works - the video card sends outputs to both
> > > > > monitors.  However, they both display the same thing.  When I move
> > the
> > > > > mouse, it moves on both monitors.  Windows, typing, and other
> > actions
> > > > > display exactly the same on both monitors.  As you know, this is
> not
> > > > what I
> > > > > want.  I would like to be doing two different things on two
> > different
> > > > > monitors, with the mouse moving between the two.  By the way,
> since
> > I
> > > > can't
> > > > > even get X to start with the dual-head xorg.conf (
> > > > > http://docs.google.com/Doc?id=dgrrq4fk_89dkgpnp), this half-way
> > > > dual-screen
> > > > > deal is the result of my normal, single-head xorg.conf:
> > > > > http://docs.google.com/Doc?id=dgrrq4fk_90jjqtn5
> > > > >
> > > > > Thanks for the help!
> > > > >
> > > > > On 5/26/07, Gabriel Doss <gabriel.doss at gmail.com> wrote:
> > > > >>
> > > > >> I don't use ATI or a laptop, but I do have dual monitors using
> FC6
> > > > using
> > > > >> an
> > > > >> nVidia card. Screen0 needs to be linked to something. Try
> > specifying
> > > > the
> > > > >> laptop monitor as Monitor0. It would default to that with only
> one
> > > > >> monitor
> > > > >> so you don't need it in the single-head config.
> > > > >>
> > > > >> To sum up, add a: "Monitor" "Monitor0" line to Screen0. Also add
> a
> > > > >> monitor
> > > > >> device identified as "Monitor0." Use the specs of your laptop
> > monitor
> > >
> > > > for
> > > > >> that. I'd also edit xorg.conf by hand as I've never had
> > > > >> system-config-display work when attempting a dual monitor setup.
> > > There
> > > > >> are
> > > > >> just too many variables that it does not account for.
> > > > >>
> > > > >> The other thing you may want to check is if the ati driver can
> > handle
> > > > >> dual
> > > > >> monitors. You may need the proprietary fglrx driver. I have no
> idea
> > > > >> whether
> > > > >> it can or cannot, just may be something you want to check.
> > > > >>
> > > > >> And good luck. Trial and error is how I got mine to work. I've
> had
> > to
> > > > >> redo
> > > > >> my xorg.conf file many times as I make hardware and other
> changes,
> > > and
> > > > it
> > > > >> is
> > > > >> usually a struggle.
> > > > >>
> > > > >> On 5/26/07, Matt Kinsel < mkinsel at gmail.com> wrote:
> > > > >> >
> > > > >> > Hi all,
> > > > >> >
> > > > >> > I'm running Fedora Core 6 on a Sony Vaio laptop, and I've got
> an
> > > > extra
> > > > >> CRT
> > > > >> > monitor that I want to use as a second monitor for my
> system.  My
> > > > >> laptop
> > > > >> > has
> > > > >> > a VGA port which I will connect the monitor to.  I used the GUI
> > > tool
> > > > >> > "system-config-display" to attempt to configure a dual-head
> > > > >> environment.
> > > > >> > After I saved the settings I logged out and tried to restart my
> X
> > > > >> server.
> > > > >> > However, I received a message saying "Failed to start X
> server",
> > > and
> > > > >> then
> > > > >> > I
> > > > >> > was given the option to view the Xorg.0.log.  The first thing I
> > > found
> > > > >> was
> > > > >> > this warning:
> > > > >> > (WW) No monitor specified for screen "Screen0"
> > > > >> > Using a default monitor configuration
> > > > >> >
> > > > >> > I also found two errors:
> > > > >> > (EE) ATI: XF86Config Device sections "Videocard0" and
> > "Videocard1"
> > > > may
> > > > >> not
> > > > >> > be assigned to the same adapter
> > > > >> > (EE)No devices detected
> > > > >> >
> > > > >> > And after those two errors there was this message:
> > > > >> > Fatal server error:
> > > > >> > no screens found
> > > > >> >
> > > > >> > That was the end of the Xorg.0.log, and then I was able to try
> to
> > > > >> > reconfigure the X server settings.  After typing in my root
> > > password,
> > > > >> the
> > > > >> > shell output this:
> > > > >> > Couldn't start X server on card 0
> > > > >> > Couldn't start X server with old config, trying with a fresh
> > > > >> configuration
> > > > >> >
> > > > >> > After that I was given the "system-config-display" GUI tool to
> > > > >> reconfigure
> > > > >> > the settings.  I put them back how they were (no dual-head),
> and
> > > then
> > > > >> the
> > > > >> > X
> > > > >> > server started fine.
> > > > >> >
> > > > >> > Well, that's how it went down. Sorry for the play-by-play
> > details,
> > > > >> but I
> > > > >> > feel that the more info given the better.  Anyways, here are my
> > > > >> > /etc/X11/xorg.conf files for the two setups:
> > > > >> >
> > > > >> > Single head: http://docs.google.com/Doc?id=dgrrq4fk_90jjqtn5
> > > > >> > Dual head: http://docs.google.com/Doc?id=dgrrq4fk_89dkgpnp
> > > > >> >
> > > > >> > Could y'all help me out with this?
> > > > >> > TIA
> > > > >> > --
> > > > >> > _______________________________________________
> > > > >> > SATLUG mailing list
> > > > >> > SATLUG at satlug.org
> > > > >> > http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> > > > >> > Powered by Rackspace ( www.rackspace.com)
> > > > >> >
> > > > >> --
> > > > >> _______________________________________________
> > > > >> SATLUG mailing list
> > > > >> SATLUG at satlug.org
> > > > >> http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> > > > >> Powered by Rackspace ( www.rackspace.com)
> > > > >>
> > > > --
> > > > _______________________________________________
> > > > SATLUG mailing list
> > > > SATLUG at satlug.org
> > > > http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> > > > Powered by Rackspace (www.rackspace.com)
> > > >
> > > --
> > > _______________________________________________
> > > SATLUG mailing list
> > > SATLUG at satlug.org
> > > http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> > > Powered by Rackspace ( www.rackspace.com)
> > >
> > --
> > _______________________________________________
> > SATLUG mailing list
> > SATLUG at satlug.org
> > http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> > Powered by Rackspace (www.rackspace.com)
> >
> --
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to unsubscribe
> Powered by Rackspace (www.rackspace.com)
>