[SATLUG] Toshiba Card Reader (Tood Bucy)

[Todd W. Bucy]

On Sunday 03 June 2007 11:51:53 am scs at worldlinkisp.com wrote:
> Lets start fresh, would you please restate the following:
> [1] Toshiba model / part number
Toshiba Sattellite A105-S4164.  it uses the Pheonix bios chip which I have 
recently and successfully updated
> [2} Kbuntu version
specifically I am using Ubuntu Studio with the Kubuntu Desktop.  My kernel 
version is 2.6.20-16-lowlatency.
> [3] Kernel
My kernel version is 2.6.20-16-lowlatency
>
> I threw you a curve pointing you to fstab (sorry),
> take a
> look at mtab.  In kernel 2.6.20 if it's recognized it
> should
> show up as /dev/sd__   /mnt/usb  vfat rw,
> nosuid,nodeb,uid=0

here is my current mtab
/dev/sda1 / reiserfs rw,notail 0 0
proc /proc proc rw,noexec,nosuid,nodev 0 0
/sys /sys sysfs rw,noexec,nosuid,nodev 0 0
varrun /var/run tmpfs rw,noexec,nosuid,nodev,mode=0755 0 0
varlock /var/lock tmpfs rw,noexec,nosuid,nodev,mode=1777 0 0
procbususb /proc/bus/usb usbfs rw 0 0
udev /dev tmpfs rw,mode=0755 0 0
devshm /dev/shm tmpfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
lrm /lib/modules/2.6.20-16-lowlatency/volatile tmpfs rw 0 0
/dev/sda3 /home reiserfs rw 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0

it dosnt look like it is as the only sd_ are my / and /home directories.  Can 
I edit this in?
>
> I located my old Fujifilm XD DPC-R1 external usb card
> reader
> and just now tried it (in Kernel 2.6.20) it
> recognizes it as
> soon as it's plugged in and appears at the bottom of
> dmesg.
this is very hopeful
>
> I can click on mountpoints, usb, and appropriate
> directory and
> then choose the jpeg I want to view (Olympus XD media)
>
> Now since your reader is built-in not sure how it's
> configured,
> but perhaps there's a light at the end of the tunnel.
I am begining to think that there is.

Thanks
Todd