[SATLUG] Disk recovery

[Bruce Dubbs]

Ernest de Leon wrote:
> This is what I suspected....I ran into the same problem with a Linksys
> NSLU2...what I did to resolve the issue was reflash the unit with the most
> current firmware, then reconnect everything and run scandisk from within
> the
> web interface on the unit.  I was also able to see the data in the drive
> when mounted under knoppix...I would try knoppix first, then the firmware
> fix....if that doesn't work, then I'm afraid the cause is lost.

We tried to look at the disk with Knoppix.  It won't mount.  At least
the first superblock is wiped to zeros.  We'll continue to check for
other superblocks, but I'm not hopeful.

Thanks for the suggestions.

  -- Bruce