[SATLUG] memory errors?
dacrummie at gmail.com
Fri Jul 25 12:58:36 CDT 2008
On Fri, Jul 25, 2008 at 10:21 AM, Todd W. Bucy <toddwbucy at grandecom.net>
> I have an interesting problem. I have a matched pair of OCZ SLI 2 gig
> ddr2 ram sticks (total 4 gigs). When I have both sticks installed and
> run a memtest I get all sorts of errors. However when I run memtest
> with just one stick installed (2 gigs) i get no errors. I have even
> tried to install the sticks in all 4 of my slots both singlly and
> together. Again both sticks test just fine when they are installed by
> themselves they only give errors when installed together.
> Anyone have any experience with this sort of thing?
> thanks for any help
> When I upgraded my system I used G.Skill DDR800 matched pair, and for a few
days I nearly pulled my hair out with problems. What I discovered was that
some BIOS don't detect the correct voltages and timing. All I had to do was
manually set both and its been working great ever since (But thats on an
US Army (Vet)
More information about the SATLUG