[SATLUG] Re; Memory Errors (Voltage)

Todd W. Bucy toddwbucy at grandecom.net
Fri Jul 25 17:37:00 CDT 2008


On Fri, 2008-07-25 at 18:20 -0400, scs at worldlinkisp.com wrote:
> You can run at 2.517vdc for short test periods, however prolonged operation could damage the memory, but will not damage anything else.
> 
> If 2.2vdc is recommended then it shouldn't need to be any higher, actually that's pretty high.  Example: I run my Adata and Corsair memory at 1.85~1.90vdc and keep my processor core voltage right at manufacturers recommendation.
> 
> I wonder how accurate your bios setting is in regard to what actually is applied to the memory module.
> 
> Lou

Fixed it!!!!  turns out that I needed to turn down my mem clock speed
down was running at 800mghz now runing at 533 @ 2.17v and it passed the
memtest.

Todd



More information about the SATLUG mailing list