[SATLUG] First question - RAID5 quit working - smartctl -a /dev/sdc

Samuel Leon satlug at net153.net
Mon Aug 17 23:35:42 CDT 2009


David Labens wrote:
> So, I ran it:
> root at RCH-SERVER:/# smartctl -a /dev/sdc
> & here are the results:

> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
>   3 Spin_Up_Time            0x0027   156   153   021    Pre-fail  Always       -       3175
>   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       200
>   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
>   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
>   9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       5841
>  10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
>  11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       198
> 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       97
> 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       200
> 194 Temperature_Celsius     0x0022   107   095   000    Old_age   Always       -       36
> 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
> 197 Current_Pending_Sector  0x0032   189   189   000    Old_age   Always       -       470
> 198 Offline_Uncorrectable   0x0030   192   192   000    Old_age   Offline      -       346
> 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
> 200 Multi_Zone_Error_Rate   0x0008   194   194   000    Old_age   Offline      -       662
> 
> SMART Error Log Version: 1
> No Errors Logged
> 
> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
> # 1  Short offline       Completed: read failure       90%      5829         16689727
> 
> SMART Selective self-test log data structure revision number 1
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>     1        0        0  Not_testing
>     2        0        0  Not_testing
>     3        0        0  Not_testing
>     4        0        0  Not_testing
>     5        0        0  Not_testing
> Selective self-test flags (0x0):
>   After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
> 
> root at RCH-SERVER:/#
> 
> I'm not sure what I'm looking at/for, but there it is.
> 
> Thanks,
> David Labens
> San Antonio, TX

Hmm, yea it is getting bad sectors so it is on it's way out
http://www.google.com/search?hl=en&safe=active&q=Current_Pending_Sector++Offline_Uncorrectable&btnG=Search

Sam


More information about the SATLUG mailing list