[SATLUG] HVR-1600 and MythTV
pjcrux at gmail.com
Wed Jun 17 14:12:23 CDT 2009
Sent an email a few days ago and didn't get a bite back so I'm resending and
hopefully will be more clear.
I have a HVR-1600 dual NTSC and ATSC tuner card model Hauppauge model 74551
LF rev C1A3 on Fedora 9.
LSPCI | grep cx18 returns the following:
02:0b.0 Multimedia video controller: Conexant Systems, Inc. CX23418
Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio
Under setup in MythTV the card does not show. I have following the
instructions from Dale Pontius via the following link:
Install *HVR-1600* drivers
# yum -y install ivtv-firmware
# yum -y install ivtv-kmdl-`uname -r`
# yum install mercurial
# cd /usr/local/src
# hg clone http://linuxtv.org/hg/v4l-dvb
# cd v4l-dvb
# make && make install
# wget http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz and copy
However the card still will not show. Am I missing one the steps? I did have
problems with the second step not working (even when I put in the actual
kernal reference and remove the "uname -r"
somebody please throw me a bone here what am I missing? Any help is always
Peter J. Cross
San Antonio, TX
"Experience has taught mankind the necessity of auxiliary precautions"
-James Madison, Federalist Paper No. 51
Please consider the environment before printing this email
More information about the SATLUG