[SATLUG] HVR-1600 and MythTV

redpill-roamer toddwbucy at grandecom.net
Wed Jun 17 18:35:45 CDT 2009


did you by any chance load the new module you went through the trouble
of creating?  I only ask because3 you did not have it listed in your
steps.

Todd

On Wed, 2009-06-17 at 14:12 -0500, Peter Cross wrote:
> Team,
> Sent an email a few days ago and didn't get a bite back so I'm resending and
> hopefully will be more clear.
> 
> I have a HVR-1600 dual NTSC and ATSC tuner card model Hauppauge model 74551
> LF rev C1A3 on Fedora 9.
> 
> LSPCI | grep cx18 returns the following:
> 
> 02:0b.0 Multimedia video controller: Conexant Systems, Inc. CX23418
> Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio
> Decoder
> 
> Under setup in MythTV the card does not show. I have following the
> instructions from Dale Pontius via the following link:
> http://www.gossamer-threads.com/lists/mythtv/users/384094
> 
> Install *HVR-1600* drivers
> # yum -y install ivtv-firmware
> # yum -y install ivtv-kmdl-`uname -r`
> # yum install mercurial
> # cd /usr/local/src
> # hg clone http://linuxtv.org/hg/v4l-dvb
> # cd v4l-dvb
> # make && make install
> # wget http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz and copy
> to /lib/firmware
> Reference: http://ivtvdriver.org/index.php/Cx18
> Reference: http://www.ivtvdriver.org/index.php/V4l2-ctl_(Examples)
> 
> However the card still will not show. Am I missing one the steps? I did have
> problems with the second step not working (even when I put in the actual
> kernal reference and remove the "uname -r"
> 
> somebody please throw me a bone here what am I missing? Any  help is always
> appreciated!
> 
> -- 
> Cheers!
> 
> Peter J. Cross
> San Antonio, TX
> 
> "Experience has taught mankind the necessity of auxiliary precautions"
> -James Madison, Federalist Paper No. 51
> 
> Please consider the environment before printing this email



More information about the SATLUG mailing list