[SATLUG] HVR-1600 and MythTV
toddwbucy at grandecom.net
Wed Jun 17 18:43:25 CDT 2009
also, I know that you dont use ubuntu but check out there forums they
might have some good leads.
On Wed, 2009-06-17 at 18:35 -0500, redpill-roamer wrote:
> did you by any chance load the new module you went through the trouble
> of creating? I only ask because3 you did not have it listed in your
> On Wed, 2009-06-17 at 14:12 -0500, Peter Cross wrote:
> > Team,
> > Sent an email a few days ago and didn't get a bite back so I'm resending and
> > hopefully will be more clear.
> > I have a HVR-1600 dual NTSC and ATSC tuner card model Hauppauge model 74551
> > LF rev C1A3 on Fedora 9.
> > LSPCI | grep cx18 returns the following:
> > 02:0b.0 Multimedia video controller: Conexant Systems, Inc. CX23418
> > Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio
> > Decoder
> > Under setup in MythTV the card does not show. I have following the
> > instructions from Dale Pontius via the following link:
> > http://www.gossamer-threads.com/lists/mythtv/users/384094
> > Install *HVR-1600* drivers
> > # yum -y install ivtv-firmware
> > # yum -y install ivtv-kmdl-`uname -r`
> > # yum install mercurial
> > # cd /usr/local/src
> > # hg clone http://linuxtv.org/hg/v4l-dvb
> > # cd v4l-dvb
> > # make && make install
> > # wget http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz and copy
> > to /lib/firmware
> > Reference: http://ivtvdriver.org/index.php/Cx18
> > Reference: http://www.ivtvdriver.org/index.php/V4l2-ctl_(Examples)
> > However the card still will not show. Am I missing one the steps? I did have
> > problems with the second step not working (even when I put in the actual
> > kernal reference and remove the "uname -r"
> > somebody please throw me a bone here what am I missing? Any help is always
> > appreciated!
> > --
> > Cheers!
> > Peter J. Cross
> > San Antonio, TX
> > "Experience has taught mankind the necessity of auxiliary precautions"
> > -James Madison, Federalist Paper No. 51
> > Please consider the environment before printing this email
More information about the SATLUG