[SATLUG] usb issues

Borries Demeler demeler at biochem.uthscsa.edu
Sat Aug 7 19:12:11 CDT 2010


Hi,

I am trying to mount a 4 GB ATP ProMax SDHC memory card from my camera
onto my filesystem by sticking in it into my 10-in-one USB adapter.
However, it never manages to recognize the storage device, and keeps 
cycling forever trying to scan the device, I keep getting endless loops
of the attached text under 'dmesg'. Any advice? Do I need to upgrade my
kernel?

Thanks,
-b.

Here is the dmesg output that keeps cycling:

scsi 7:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
sd 7:0:0:2: [sdd] Attached SCSI removable disk
sd 7:0:0:2: Attached scsi generic sg4 type 0
scsi 7:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
sd 7:0:0:3: [sde] Attached SCSI removable disk
sd 7:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
usb 1-6: reset high speed USB device using ehci_hcd and address 7
usb 1-6: reset high speed USB device using ehci_hcd and address 7
sd 7:0:0:2: Device offlined - not ready after error recovery
usb 1-6: USB disconnect, address 7
sd 7:0:0:0: [sdb] READ CAPACITY failed
sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:0: [sdb] Sense not available.
sd 7:0:0:3: [sde] READ CAPACITY failed
sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:3: [sde] Sense not available.
sd 7:0:0:1: [sdc] READ CAPACITY failed
sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:1: [sdc] Sense not available.
sd 7:0:0:1: [sdc] Write Protect is off
sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
sd 7:0:0:1: [sdc] Assuming drive cache: write through
sd 7:0:0:3: [sde] Write Protect is off
sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
sd 7:0:0:3: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] READ CAPACITY failed
sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:0: [sdb] Sense not available.
sd 7:0:0:3: [sde] READ CAPACITY failed
sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:3: [sde] Sense not available.
sd 7:0:0:1: [sdc] READ CAPACITY failed
sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 7:0:0:1: [sdc] Sense not available.
sd 7:0:0:1: [sdc] Write Protect is off
sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
sd 7:0:0:1: [sdc] Assuming drive cache: write through
sd 7:0:0:3: [sde] Write Protect is off
sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
sd 7:0:0:3: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 7:0:0:0: [sdb] Assuming drive cache: write through
usb 1-6: new high speed USB device using ehci_hcd and address 8
usb 1-6: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 1-6: Product: USB Storage
usb 1-6: SerialNumber: 000000009144
scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
sd 8:0:0:0: Device offlined - not ready after error recovery
sd 8:0:0:0: rejecting I/O to offline device
sd 8:0:0:0: rejecting I/O to offline device
sd 8:0:0:0: rejecting I/O to offline device
sd 8:0:0:0: [sdb] READ CAPACITY failed
sd 8:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
sd 8:0:0:0: [sdb] Sense not available.
sd 8:0:0:0: rejecting I/O to offline device
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg2 type 0
usb 1-6: USB disconnect, address 8
usb-storage: device scan complete
usb 1-6: new high speed USB device using ehci_hcd and address 9
usb 1-6: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 1-6: Product: USB Storage
usb 1-6: SerialNumber: 000000009144
usb 1-6: reset high speed USB device using ehci_hcd and address 9
scsi 9:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
etc...


More information about the SATLUG mailing list