[SATLUG] usb issues

Borries Demeler demeler at biochem.uthscsa.edu
Sun Aug 8 08:04:22 CDT 2010


> 
> This is a hot topic.
> http://www.google.com/search?q=idVendor%3D05e3%2C+idProduct%3D0710
> http://www.mail-archive.com/linux-usb-users@lists.sourceforge.net/msg18305.html
> 
> Is it plugged in well? Someone suggested plugging it in until it works.

I had already tried that, but to no avail. Thanks for the suggestion! -b.
> 
> 
> 
> On 08/07/2010 07:12 PM, Borries Demeler wrote:
> > Hi,
> > 
> > I am trying to mount a 4 GB ATP ProMax SDHC memory card from my camera
> > onto my filesystem by sticking in it into my 10-in-one USB adapter.
> > However, it never manages to recognize the storage device, and keeps 
> > cycling forever trying to scan the device, I keep getting endless loops
> > of the attached text under 'dmesg'. Any advice? Do I need to upgrade my
> > kernel?
> > 
> > Thanks,
> > -b.
> > 
> > Here is the dmesg output that keeps cycling:
> > 
> > scsi 7:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
> > sd 7:0:0:2: [sdd] Attached SCSI removable disk
> > sd 7:0:0:2: Attached scsi generic sg4 type 0
> > scsi 7:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
> > sd 7:0:0:3: [sde] Attached SCSI removable disk
> > sd 7:0:0:3: Attached scsi generic sg5 type 0
> > usb-storage: device scan complete
> > usb 1-6: reset high speed USB device using ehci_hcd and address 7
> > usb 1-6: reset high speed USB device using ehci_hcd and address 7
> > sd 7:0:0:2: Device offlined - not ready after error recovery
> > usb 1-6: USB disconnect, address 7
> > sd 7:0:0:0: [sdb] READ CAPACITY failed
> > sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:0: [sdb] Sense not available.
> > sd 7:0:0:3: [sde] READ CAPACITY failed
> > sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:3: [sde] Sense not available.
> > sd 7:0:0:1: [sdc] READ CAPACITY failed
> > sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:1: [sdc] Sense not available.
> > sd 7:0:0:1: [sdc] Write Protect is off
> > sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
> > sd 7:0:0:1: [sdc] Assuming drive cache: write through
> > sd 7:0:0:3: [sde] Write Protect is off
> > sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
> > sd 7:0:0:3: [sde] Assuming drive cache: write through
> > sd 7:0:0:0: [sdb] Write Protect is off
> > sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> > sd 7:0:0:0: [sdb] Assuming drive cache: write through
> > sd 7:0:0:0: [sdb] READ CAPACITY failed
> > sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:0: [sdb] Sense not available.
> > sd 7:0:0:3: [sde] READ CAPACITY failed
> > sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:3: [sde] Sense not available.
> > sd 7:0:0:1: [sdc] READ CAPACITY failed
> > sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> > sd 7:0:0:1: [sdc] Sense not available.
> > sd 7:0:0:1: [sdc] Write Protect is off
> > sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
> > sd 7:0:0:1: [sdc] Assuming drive cache: write through
> > sd 7:0:0:3: [sde] Write Protect is off
> > sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
> > sd 7:0:0:3: [sde] Assuming drive cache: write through
> > sd 7:0:0:0: [sdb] Write Protect is off
> > sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> > sd 7:0:0:0: [sdb] Assuming drive cache: write through
> > usb 1-6: new high speed USB device using ehci_hcd and address 8
> > usb 1-6: configuration #1 chosen from 1 choice
> > scsi8 : SCSI emulation for USB Mass Storage devices
> > usb-storage: device found at 8
> > usb-storage: waiting for device to settle before scanning
> > usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
> > usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
> > usb 1-6: Product: USB Storage
> > usb 1-6: SerialNumber: 000000009144
> > scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
> > sd 8:0:0:0: Device offlined - not ready after error recovery
> > sd 8:0:0:0: rejecting I/O to offline device
> > sd 8:0:0:0: rejecting I/O to offline device
> > sd 8:0:0:0: rejecting I/O to offline device
> > sd 8:0:0:0: [sdb] READ CAPACITY failed
> > sd 8:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> > sd 8:0:0:0: [sdb] Sense not available.
> > sd 8:0:0:0: rejecting I/O to offline device
> > sd 8:0:0:0: [sdb] Write Protect is off
> > sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
> > sd 8:0:0:0: [sdb] Assuming drive cache: write through
> > sd 8:0:0:0: [sdb] Attached SCSI removable disk
> > sd 8:0:0:0: Attached scsi generic sg2 type 0
> > usb 1-6: USB disconnect, address 8
> > usb-storage: device scan complete
> > usb 1-6: new high speed USB device using ehci_hcd and address 9
> > usb 1-6: configuration #1 chosen from 1 choice
> > scsi9 : SCSI emulation for USB Mass Storage devices
> > usb-storage: device found at 9
> > usb-storage: waiting for device to settle before scanning
> > usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
> > usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
> > usb 1-6: Product: USB Storage
> > usb 1-6: SerialNumber: 000000009144
> > usb 1-6: reset high speed USB device using ehci_hcd and address 9
> > scsi 9:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
> > etc...
> 
> -- 
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)
> 



More information about the SATLUG mailing list