[SATLUG] usb issues

MKR mkr777 at gmail.com
Sun Aug 8 08:39:01 CDT 2010


Have you tried with a different card reader?

-MKR

On Sat, Aug 7, 2010 at 7:12 PM, Borries Demeler <demeler at biochem.uthscsa.edu
> wrote:

> Hi,
>
> I am trying to mount a 4 GB ATP ProMax SDHC memory card from my camera
> onto my filesystem by sticking in it into my 10-in-one USB adapter.
> However, it never manages to recognize the storage device, and keeps
> cycling forever trying to scan the device, I keep getting endless loops
> of the attached text under 'dmesg'. Any advice? Do I need to upgrade my
> kernel?
>
> Thanks,
> -b.
>
> Here is the dmesg output that keeps cycling:
>
> scsi 7:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI:
> 0
> sd 7:0:0:2: [sdd] Attached SCSI removable disk
> sd 7:0:0:2: Attached scsi generic sg4 type 0
> scsi 7:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI:
> 0
> sd 7:0:0:3: [sde] Attached SCSI removable disk
> sd 7:0:0:3: Attached scsi generic sg5 type 0
> usb-storage: device scan complete
> usb 1-6: reset high speed USB device using ehci_hcd and address 7
> usb 1-6: reset high speed USB device using ehci_hcd and address 7
> sd 7:0:0:2: Device offlined - not ready after error recovery
> usb 1-6: USB disconnect, address 7
> sd 7:0:0:0: [sdb] READ CAPACITY failed
> sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:0: [sdb] Sense not available.
> sd 7:0:0:3: [sde] READ CAPACITY failed
> sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:3: [sde] Sense not available.
> sd 7:0:0:1: [sdc] READ CAPACITY failed
> sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:1: [sdc] Sense not available.
> sd 7:0:0:1: [sdc] Write Protect is off
> sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
> sd 7:0:0:1: [sdc] Assuming drive cache: write through
> sd 7:0:0:3: [sde] Write Protect is off
> sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
> sd 7:0:0:3: [sde] Assuming drive cache: write through
> sd 7:0:0:0: [sdb] Write Protect is off
> sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> sd 7:0:0:0: [sdb] Assuming drive cache: write through
> sd 7:0:0:0: [sdb] READ CAPACITY failed
> sd 7:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:0: [sdb] Sense not available.
> sd 7:0:0:3: [sde] READ CAPACITY failed
> sd 7:0:0:3: [sde] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:3: [sde] Sense not available.
> sd 7:0:0:1: [sdc] READ CAPACITY failed
> sd 7:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> sd 7:0:0:1: [sdc] Sense not available.
> sd 7:0:0:1: [sdc] Write Protect is off
> sd 7:0:0:1: [sdc] Mode Sense: 00 00 00 00
> sd 7:0:0:1: [sdc] Assuming drive cache: write through
> sd 7:0:0:3: [sde] Write Protect is off
> sd 7:0:0:3: [sde] Mode Sense: 00 00 00 00
> sd 7:0:0:3: [sde] Assuming drive cache: write through
> sd 7:0:0:0: [sdb] Write Protect is off
> sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> sd 7:0:0:0: [sdb] Assuming drive cache: write through
> usb 1-6: new high speed USB device using ehci_hcd and address 8
> usb 1-6: configuration #1 chosen from 1 choice
> scsi8 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 8
> usb-storage: waiting for device to settle before scanning
> usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
> usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
> usb 1-6: Product: USB Storage
> usb 1-6: SerialNumber: 000000009144
> scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI:
> 0
> sd 8:0:0:0: Device offlined - not ready after error recovery
> sd 8:0:0:0: rejecting I/O to offline device
> sd 8:0:0:0: rejecting I/O to offline device
> sd 8:0:0:0: rejecting I/O to offline device
> sd 8:0:0:0: [sdb] READ CAPACITY failed
> sd 8:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
> sd 8:0:0:0: [sdb] Sense not available.
> sd 8:0:0:0: rejecting I/O to offline device
> sd 8:0:0:0: [sdb] Write Protect is off
> sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
> sd 8:0:0:0: [sdb] Assuming drive cache: write through
> sd 8:0:0:0: [sdb] Attached SCSI removable disk
> sd 8:0:0:0: Attached scsi generic sg2 type 0
> usb 1-6: USB disconnect, address 8
> usb-storage: device scan complete
> usb 1-6: new high speed USB device using ehci_hcd and address 9
> usb 1-6: configuration #1 chosen from 1 choice
> scsi9 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 9
> usb-storage: waiting for device to settle before scanning
> usb 1-6: New USB device found, idVendor=05e3, idProduct=0710
> usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
> usb 1-6: Product: USB Storage
> usb 1-6: SerialNumber: 000000009144
> usb 1-6: reset high speed USB device using ehci_hcd and address 9
> scsi 9:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI:
> 0
> etc...
> --
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)
>


More information about the SATLUG mailing list