[SATLUG] New camera prob

jameson zenbound at gmail.com
Sun Jan 16 11:31:14 CST 2011


what is the model of the camera?



On Jan 16, 2011, at 7:31 AM, Borries Demeler <demeler at biochem.uthscsa.edu> wrote:

> hanks Mark but Kodak does not support linux with it's install software so this
> should work tru simply connecting the cam and having the USB drivers set it up as a
> file system .. That is my understanding anyway. Also consider that 'shotwell does
> see the cam and finds it locked... locked by whom is my question but I do not know
> how to ask. I ran 'hwinfo' and  ( I cannot understand it perhaps someone can) here
> are the failure lines I think:
> 
> [   57.240815] Bluetooth: RFCOMM socket layer initialized
> [   57.240819] Bluetooth: RFCOMM ver 1.11
> [  115.920260] usb 1-4.3: new full speed USB device using ehci_hcd and address 4
> [  116.053747] usb 1-4.3: configuration #1 chosen from 1 choice
> [  174.024131] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 255 ret -110
> [  175.024189] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 1000 ret -110
> [  176.024246] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 255 ret -110
> [  177.024181] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 1000 ret -110
> [  204.000627] usb 1-4.3: USB disconnect, address 4
> [  250.772385] usb 1-4.3: new full speed USB device using ehci_hcd and address 5
> [  250.898737] usb 1-4.3: configuration #1 chosen from 1 choice
> [ 3037.428439] usb 1-4.3: USB disconnect, address 5
> [ 3739.876328] usb 1-4.3: new full speed USB device using ehci_hcd and address 6
> [ 3740.002023] usb 1-4.3: configuration #1 chosen from 1 choice
> [ 3745.053997] usb 1-4.3: USB disconnect, address 6
> [ 3777.256292] usb 1-4.3: new full speed USB device using ehci_hcd and address 7
> [ 3777.385563] usb 1-4.3: configuration #1 chosen from 1 choice
> [ 3787.392142] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 255 ret -110
> [ 3788.392198] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 1000 ret -110
> [ 3789.392133] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 255 ret -110
> [ 3790.392232] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 1000 ret -110
> [ 3803.312078] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 255 ret -110
> [ 3804.312260] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 1000 ret -110
> [ 3805.312196] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 255 ret -110
> [ 3806.312130] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 128 rq 6 len
> 1000 ret -110
> [ 3855.792294] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 255 ret -110
> [ 3856.792227] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 1000 ret -110
> [ 3857.792163] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 255 ret -110
> [ 3858.792242] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 128 rq 6
> len 1000 ret -110
> [ 5016.681172] usb 1-4.3: USB disconnect, address 7
> herb at herb-Aelf:~$ 
> 
> Herb,
> 
> I believe this dmesg trace says that whatever software you have
> currently installed doesn't support the camera. The application I use
> is gphoto2, http://www.gphoto.org/, it supports most cameras from all
> photo applications afaik. However, when I checked their list of supported
> cameras (http://www.gphoto.org/proj/libgphoto2/support.php), the Kodak
> C182 was unfortunately missing from the list. So your only choice may
> be to wait for the memory card or use a Windows computer to download
> your pics until the memory card arrives :-(
> 
> It is usually a good idea to check the relevant Linux supported hardware
> lists before deciding on a piece of hardware to make sure that it is
> supported by linux before you buy it. Often, the manufacturer uses a
> proprietary interface and does not release the information to the public
> domain, and then you are stuck with Windows only. This is particularly
> true for very new hardware.
> 
> Regards, -Borries
> -- 
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)


More information about the SATLUG mailing list