[SATLUG] New camera prob

Borries Demeler demeler at biochem.uthscsa.edu
Sun Jan 16 11:32:18 CST 2011


Kodak C182
> 
> what is the model of the camera?
> 
> 
> 
> On Jan 16, 2011, at 7:31 AM, Borries Demeler <demeler at biochem.uthscsa.edu> w=
> rote:
> 
> > hanks Mark but Kodak does not support linux with it's install software so t=
> his
> > should work tru simply connecting the cam and having the USB drivers set i=
> t up as a
> > file system .. That is my understanding anyway. Also consider that 'shotwe=
> ll does
> > see the cam and finds it locked... locked by whom is my question but I do n=
> ot know
> > how to ask. I ran 'hwinfo' and  ( I cannot understand it perhaps someone c=
> an) here
> > are the failure lines I think:
> >=20
> > [   57.240815] Bluetooth: RFCOMM socket layer initialized
> > [   57.240819] Bluetooth: RFCOMM ver 1.11
> > [  115.920260] usb 1-4.3: new full speed USB device using ehci_hcd and add=
> ress 4
> > [  116.053747] usb 1-4.3: configuration #1 chosen from 1 choice
> > [  174.024131] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 255 ret -110
> > [  175.024189] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 1000 ret -110
> > [  176.024246] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 255 ret -110
> > [  177.024181] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 1000 ret -110
> > [  204.000627] usb 1-4.3: USB disconnect, address 4
> > [  250.772385] usb 1-4.3: new full speed USB device using ehci_hcd and add=
> ress 5
> > [  250.898737] usb 1-4.3: configuration #1 chosen from 1 choice
> > [ 3037.428439] usb 1-4.3: USB disconnect, address 5
> > [ 3739.876328] usb 1-4.3: new full speed USB device using ehci_hcd and add=
> ress 6
> > [ 3740.002023] usb 1-4.3: configuration #1 chosen from 1 choice
> > [ 3745.053997] usb 1-4.3: USB disconnect, address 6
> > [ 3777.256292] usb 1-4.3: new full speed USB device using ehci_hcd and add=
> ress 7
> > [ 3777.385563] usb 1-4.3: configuration #1 chosen from 1 choice
> > [ 3787.392142] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 255 ret -110
> > [ 3788.392198] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 1000 ret -110
> > [ 3789.392133] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 255 ret -110
> > [ 3790.392232] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 1000 ret -110
> > [ 3803.312078] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 255 ret -110
> > [ 3804.312260] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 1000 ret -110
> > [ 3805.312196] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 255 ret -110
> > [ 3806.312130] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
> 8 rq 6 len
> > 1000 ret -110
> > [ 3855.792294] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 255 ret -110
> > [ 3856.792227] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 1000 ret -110
> > [ 3857.792163] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 255 ret -110
> > [ 3858.792242] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
> 28 rq 6
> > len 1000 ret -110
> > [ 5016.681172] usb 1-4.3: USB disconnect, address 7
> > herb at herb-Aelf:~$=20
> >=20
> > Herb,
> >=20
> > I believe this dmesg trace says that whatever software you have
> > currently installed doesn't support the camera. The application I use
> > is gphoto2, http://www.gphoto.org/, it supports most cameras from all
> > photo applications afaik. However, when I checked their list of supported
> > cameras (http://www.gphoto.org/proj/libgphoto2/support.php), the Kodak
> > C182 was unfortunately missing from the list. So your only choice may
> > be to wait for the memory card or use a Windows computer to download
> > your pics until the memory card arrives :-(
> >=20
> > It is usually a good idea to check the relevant Linux supported hardware
> > lists before deciding on a piece of hardware to make sure that it is
> > supported by linux before you buy it. Often, the manufacturer uses a
> > proprietary interface and does not release the information to the public
> > domain, and then you are stuck with Windows only. This is particularly
> > true for very new hardware.
> >=20
> > Regards, -Borries
> > --=20
> > _______________________________________________
> > SATLUG mailing list
> > SATLUG at satlug.org
> > http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> > Powered by Rackspace (www.rackspace.com)
> -- 
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)
> 



More information about the SATLUG mailing list