[SATLUG] New camera prob

jameson zenbound at gmail.com
Sun Jan 16 12:41:37 CST 2011


have u tried this? 


http://ubuntuforums.org/showthread.php?t=340271&highlight=kodak


On Jan 16, 2011, at 11:32 AM, Borries Demeler <demeler at biochem.uthscsa.edu> wrote:

> Kodak C182
>> 
>> what is the model of the camera?
>> 
>> 
>> 
>> On Jan 16, 2011, at 7:31 AM, Borries Demeler <demeler at biochem.uthscsa.edu> w=
>> rote:
>> 
>>> hanks Mark but Kodak does not support linux with it's install software so t=
>> his
>>> should work tru simply connecting the cam and having the USB drivers set i=
>> t up as a
>>> file system .. That is my understanding anyway. Also consider that 'shotwe=
>> ll does
>>> see the cam and finds it locked... locked by whom is my question but I do n=
>> ot know
>>> how to ask. I ran 'hwinfo' and  ( I cannot understand it perhaps someone c=
>> an) here
>>> are the failure lines I think:
>>> =20
>>> [   57.240815] Bluetooth: RFCOMM socket layer initialized
>>> [   57.240819] Bluetooth: RFCOMM ver 1.11
>>> [  115.920260] usb 1-4.3: new full speed USB device using ehci_hcd and add=
>> ress 4
>>> [  116.053747] usb 1-4.3: configuration #1 chosen from 1 choice
>>> [  174.024131] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 255 ret -110
>>> [  175.024189] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 1000 ret -110
>>> [  176.024246] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 255 ret -110
>>> [  177.024181] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 1000 ret -110
>>> [  204.000627] usb 1-4.3: USB disconnect, address 4
>>> [  250.772385] usb 1-4.3: new full speed USB device using ehci_hcd and add=
>> ress 5
>>> [  250.898737] usb 1-4.3: configuration #1 chosen from 1 choice
>>> [ 3037.428439] usb 1-4.3: USB disconnect, address 5
>>> [ 3739.876328] usb 1-4.3: new full speed USB device using ehci_hcd and add=
>> ress 6
>>> [ 3740.002023] usb 1-4.3: configuration #1 chosen from 1 choice
>>> [ 3745.053997] usb 1-4.3: USB disconnect, address 6
>>> [ 3777.256292] usb 1-4.3: new full speed USB device using ehci_hcd and add=
>> ress 7
>>> [ 3777.385563] usb 1-4.3: configuration #1 chosen from 1 choice
>>> [ 3787.392142] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 255 ret -110
>>> [ 3788.392198] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 1000 ret -110
>>> [ 3789.392133] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 255 ret -110
>>> [ 3790.392232] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 1000 ret -110
>>> [ 3803.312078] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 255 ret -110
>>> [ 3804.312260] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 1000 ret -110
>>> [ 3805.312196] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 255 ret -110
>>> [ 3806.312130] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd f-spot rqt 12=
>> 8 rq 6 len
>>> 1000 ret -110
>>> [ 3855.792294] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 255 ret -110
>>> [ 3856.792227] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 1000 ret -110
>>> [ 3857.792163] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 255 ret -110
>>> [ 3858.792242] usb 1-4.3: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 1=
>> 28 rq 6
>>> len 1000 ret -110
>>> [ 5016.681172] usb 1-4.3: USB disconnect, address 7
>>> herb at herb-Aelf:~$=20
>>> =20
>>> Herb,
>>> =20
>>> I believe this dmesg trace says that whatever software you have
>>> currently installed doesn't support the camera. The application I use
>>> is gphoto2, http://www.gphoto.org/, it supports most cameras from all
>>> photo applications afaik. However, when I checked their list of supported
>>> cameras (http://www.gphoto.org/proj/libgphoto2/support.php), the Kodak
>>> C182 was unfortunately missing from the list. So your only choice may
>>> be to wait for the memory card or use a Windows computer to download
>>> your pics until the memory card arrives :-(
>>> =20
>>> It is usually a good idea to check the relevant Linux supported hardware
>>> lists before deciding on a piece of hardware to make sure that it is
>>> supported by linux before you buy it. Often, the manufacturer uses a
>>> proprietary interface and does not release the information to the public
>>> domain, and then you are stuck with Windows only. This is particularly
>>> true for very new hardware.
>>> =20
>>> Regards, -Borries
>>> --=20
>>> _______________________________________________
>>> SATLUG mailing list
>>> SATLUG at satlug.org
>>> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
>>> Powered by Rackspace (www.rackspace.com)
>> -- 
>> _______________________________________________
>> SATLUG mailing list
>> SATLUG at satlug.org
>> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
>> Powered by Rackspace (www.rackspace.com)
>> 
> 
> -- 
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)


More information about the SATLUG mailing list