[SATLUG] A challenge for all seasoned experts :-)

Borries Demeler demeler at biochem.uthscsa.edu
Wed Jan 29 08:58:03 CST 2014


Who sells it, and where can I get it?

On Wed, Jan 29, 2014 at 08:22:41AM -0600, Othniel Graichen wrote:
> Its commercial software.  for MS-DOS 3.3
> 
> 
> On Tue, Jan 28, 2014 at 6:53 PM, Borries Demeler <
> demeler at biochem.uthscsa.edu> wrote:
> 
> > Othniel, where can I download that?
> >
> > Thanks, -b.
> >
> > On Mon, Jan 27, 2014 at 09:40:20PM -0600, Othniel Graichen wrote:
> > > I have TCP/IP for MS-DOS that I remember works with the ISA 3c509C ISA
> > > card.  When I say TCP/IP I mean it has all the tools telnet FTP and I
> > > believe ssh/scp.
> > >
> > >
> > > On Sun, Jan 26, 2014 at 12:28 PM, Borries Demeler <
> > > demeler at biochem.uthscsa.edu> wrote:
> > >
> > > > Here is a challenge for all you seasoned experts with previous DOS
> > > > experience:
> > > >
> > > > I have recently revived an old but excellent spectrophotometer that was
> > > > built
> > > > on top of a 486 motherboard. Miraculously, the motherboard still works
> > > > (after
> > > > resetting the bios with some jumper surgery), but now I am facing a
> > second
> > > > hurdle: The spectrophotometer has a bad 3.5" floppy drive that was
> > used to
> > > > output
> > > > the data. All floppies I have tried fail to be recognized, although
> > > > they work fine on some other computer which has a floppy drive. So
> > forget
> > > > the floppies - don't want to deal with them anyway. There is an old
> > 3c509
> > > > network card (isa) in this spectrophotometer that has a (presumably)
> > > > 10baseT
> > > > cat 5 ethernet connector. The whole system is running MSDOS DOS 3.3.
> > > > The software controlling the spec needs DOS (its not a windows
> > program).
> > > >
> > > > So, right now everything is stored on an old 40 MB (!) seagate
> > harddrive,
> > > > which also miraculously still works. I want to first make a backup of
> > the
> > > > whole system and then find some backup hardware that can be retrofitted
> > > > onto the old motherboard in case other stuff fails - the spec is really
> > > > high quality and I would hate to lose it. The controller boards are all
> > > > ISA and so I cannot use a new motherboard.
> > > >
> > > > For now, I would be happy to somehow just get the 3c509 network card to
> > > > work under dos 3.3 and hook up an ethernet cable and be able to dump
> > files
> > > > out over the network. Now I forgot pretty much anything about DOS
> > > > networking
> > > > and wouldn't know where to get the files. I can probably find an old
> > driver
> > > > on the harddrive for the 3c509 card, but maybe there is something else
> > > > available? What is the best way to network this old computer, and where
> > > > could I find the necessary software?
> > > >
> > > > command line ftp, scp, rsync or similar would be fantastic, am I asking
> > > > for too much? What are my options here? The machine has 4 MB of RAM,
> > and
> > > > is a 486. I *might* be able to find some more RAM for this if this is
> > > > necessary.
> > > >
> > > > Thanks, -b.
> > > > --
> > > > _______________________________________________
> > > > SATLUG mailing list
> > > > SATLUG at satlug.org
> > > > http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> > > > Powered by Rackspace (www.rackspace.com)
> > > >
> > > --
> > > _______________________________________________
> > > SATLUG mailing list
> > > SATLUG at satlug.org
> > > http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> > > Powered by Rackspace (www.rackspace.com)
> > --
> > _______________________________________________
> > SATLUG mailing list
> > SATLUG at satlug.org
> > http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> > Powered by Rackspace (www.rackspace.com)
> >
> -- 
> _______________________________________________
> SATLUG mailing list
> SATLUG at satlug.org
> http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
> Powered by Rackspace (www.rackspace.com)


More information about the SATLUG mailing list