[SATLUG] RE: January meeting?

Travis Hegwer travis at dstechnology.net
Thu Jan 15 22:15:24 CST 2015

Good Question,

	When is the next meeting and is Rackspace still an option for venue?


-----Original Message-----
From: satlug-bounces at satlug.org [mailto:satlug-bounces at satlug.org] On Behalf Of Rosie Contreras
Sent: Thursday, January 15, 2015 12:42 PM
To: The San Antonio Linux User's Group Mailing List
Subject: [SATLUG] January meeting?

Is there any word on a January meeting?

Rosie Contreras
Technical Writer II
Rackspace Hosting
Direct	210.312.8418
Cellular	210.216.7803

On 12/30/14, 3:22 PM, "Bruce Dubbs" <bruce.dubbs at gmail.com> wrote:

>If someone sets up a meeting, I'd be glad to do that.  I do not know my 
>schedule yet for the Spring semester, but I may have classes on both 
>Tuesday and Thursday evenings.
>Alternatively, I'd be glad to answer any questions here on the list.
>   -- Bruce
>Chris Hudson wrote:
>> I'd like to see a meeting where everyone could bring in a laptop and  
>>someone, *cough* Dr Dubbs *cough* could lead a Linux from Scratch 
>>install  session.
>>   :-)
>> On Mon, Dec 29, 2014 at 12:20 PM, Kevin Buckner 
>> <sirjaggy29 at gmail.com>
>> wrote:
>>> Does this mean no more Satlug meetings in 2015 as well? Is Satlug 
>>>closed  down as of this year?
>>> On Dec 4, 2014 11:35 AM, "Jose Leiva" <leivajose at gmail.com> wrote:
>>>> Dont think there will be a meeting unless im wrong?
>>>> On Dec 3, 2014 1:12 PM, "Rosie Contreras"
>>>><rose.contreras at rackspace.com>
>>>> wrote:
>>>>> Will there be a SATLUG meeting for December?
>>>>> Rosie Contreras
>>>>> Technical Writer II
>>>>> -----
>>>>> Rackspace Hosting
>>>>> Direct  210.312.8418
>>>>> Cellular        210.216.7803
>>>>> On 11/13/14, 2:44 PM, "Craig" <sargonemail at gmail.com> wrote:
>>>>>> On Wed, 11/12/14, Bruce Dubbs <bruce.dubbs at gmail.com 
>>>>>> <http://alamo.satlug.org/mailman/listinfo/satlug>> wrote:
>>>>>>> The problem then would be topics and presenters.
>>>>>> Actually, I'd say it was the shift from "how do I use linux" to 
>>>>>>"where  can linux be used/what can be used with linux" is where 
>>>>>>SATLUG missed  the boat.
>>>>>> When SATLUG started out ~20 years ago, the internet was 
>>>>>>relatively a  "new" concept, so finding information on "how do I 
>>>>>>use linux" wasn't  as easy as it is now.
>>>>>> A lot of the early meetings revolved around talking about "how 
>>>>>>are you  using linux" && "what help do you need to keep going" 
>>>>>>--much of what  was discussed in the early years  is now 
>>>>>>"automated" -- when's the last time a linux distro required a  
>>>>>>user to figure out the dot timing of the video screen in use.
>>>>>> Over the years the SATLUG discussions, shifted to "what apps are  
>>>>>>available for me to do <fill in software requirements> under 
>>>>>>linux/how  do I do <software process>"
>>>>>> Online classes/courses/resources are a "mainstream" option that  
>>>>>>provide more in-depth learning/discussion than would be possible 
>>>>>>at a  meeting / 2-3 day discussion.
>>>>>> As "open source" became "mainstream" and moved in the hardware  
>>>>>>direction, the "linux os" stuff was old news even on new platforms.
>>>>>> Much of the approach that SATLUG took early on has been 
>>>>>>superseded by  "time" --  SATLUG hasn't really evolved to keep up.
>>>>>>> Perhaps Linux is getting to be too mainstream.
>>>>>> Linux the OS, yeah.  Apps/hardware for/using/running under linux, 
>>>>>> A few examples of the above:
>>>>>> ** "Using Linux OS to run <fill in latest hardware>" compared to 
>>>>>> "I'm using linux so that various system on a chip boards can be 
>>>>>> interchanged with my 3d printed pi-top hardware (pi-top.com) 
>>>>>> without having to any of my software."  see "Alternatives to 
>>>>>> raspberry pi"
>>>>>> http://satlug.org/pipermail/satlug/2014-September/067980.html
>>>>>> ** Using CUDA under linux in order to get 300 giggaflops out of a 
>>>>>> credit card size board is hardly main stream.
>>>>>> Note: 300 gigaflops in the early 90's would have put the machine 
>>>>>> in the top 10 fastest computers list.
>>>>>> **A 300 gigaflop diy linux laptop would certainly provide for a 
>>>>>>nice  discussion -- heavily hardware centric of course.
>>>>>> A 1-1024 node (http://elinux.org/Parallella) computing expansion 
>>>>>>of  the raspberry pi without using beowulf cluster  software might 
>>>>>>be more interesting, but still quite hardware centric.
>>>>>> Note: Each node is a 9 watt ~85gigaflop node! -- That's a 
>>>>>>terrabyte  laptop in 27watts!
>>>>>> The snarky 90's joke would have been "grate, with a 'terrabyte'
>>>>>> laptop, I can have an MSOS app/oss run in emulation at normal,  
>>>>>>non-emulated speeds."."
>>>>>> Today, there are quite a few ways to run MSOS stuff under 
>>>>>>emulation at  "normal" speeds without requiring a "terrabyte" 
>>>>>> So, without "mainstream/common" hardware, is a comparison of 
>>>>>>running a  linux beowulf cluster vs. a scalable linux terrabyte 
>>>>>>laptop going to  work?
>>>>>> Little bit more than my $0.02 worth (or ~$1.00 if starting from 
>>>>>>SATLUG  beginnings).
>SATLUG mailing list
>SATLUG at satlug.org
>http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
>Powered by Rackspace (www.rackspace.com)

SATLUG mailing list
SATLUG at satlug.org
http://alamo.satlug.org/mailman/listinfo/satlug to manage/unsubscribe
Powered by Rackspace (www.rackspace.com)

More information about the SATLUG mailing list